20240202 EYF General Catalogue Final English KOPEX - Flipbook - Page 7
Intelligent Shut-Off Series
WLAN Controller with Maximum 8 Tools Simultaneous Control Capability
Hanged on wall
With controller stand
Various control of tools is possible without
external equipment
Diversity
antenna
Batch
Mount
holes
Continuous work with 1 tool
and 1 torque setting
Job
Sequence
Continuous work with 1 tool and
multiple torque settings
Continuous work with multiple
tools and multiple torque settings
290mm
USB-A
Ethernet
（Initial setting）
OK/NOK
lamp
Ethernet
（Network）
Com
Buzzer
Power switch
30Nm
16m
Multiple fastening works with
different bolt lengths
Ex.2
Multiple fastening works
which can not be covered with
a single tool torque range
Mix of pre-fastening and 昀椀nal
fastening
30Nm
30Nm
1
2
3
25Nm
20Nm
30Nm
4
Com
plete
40Nm
Up to 10 steps (batches) can be
set for a job
Up to 5 jobs can be registered for
a tool
approx
10m
1st tool: EYFMH1
（20-60Nm）
1
2
3
25Nm
20Nm
30Nm
4
Tool
Chan
ge
40Nm
2nd tool: EYFMH2
（50-120Nm）
5
6
7
8
Comp
60Nm
70Nm
60Nm
lete
100Nm
Up to 10 steps (batches/jobs) can be
set for a sequence
Up to 5 sequences can be registered
in a controller
Maximum 8 tools simultaneous control
Simultaneously control the operations of
up to 8 tools and collect work history data.
5GHz
Model
Support both 2.4GHz and 5GHz frequency
To avoid interference, the frequency can be selected according to the
usage environment.There is also an auto channel function that
automatically selects an empty channel.
AC power adapter
EU : EYFRW1K7751W
UK : EYFRW1K7851W
Stable communication performance is achieved by the highly ef昀椀cient
antenna design (average -5dBi) of the diversity antenna on the controller
and the transmission module on the tool.
Demonstrates high performance with various tool positions and directions.
[
8 Tools
Safety function in case of communication
disconnection
Work history data can be backed up in the tool and resent to the
controller even when communication is temporarily disconnected,
allowing work to continue.
High security
Communication data is encrypted and protected by TLS.
Setting and viewing from a web browser
WLAN access point compatible
Supports communication via general
WLAN access points.
Tools can be used regardless of where the
controller is installed.
Tool/controller settings and work history data viewing can be done from a
web browser.
No software installation required on your PC.
Compatible models:IEEE.802.11a/b/g/n
compliant WLAN access points
Controller stand
WEYFRW1F7001
EYFRW2
• OK/NOK
Communication data
High ef昀椀ciency antenna design
11
Ex.2
150mm
Recommended range
2.4GHz
30Nm
Reset
button
Various Technologies for Stable
Wireless Communication
approx
Multiple fastening works with
multiple bolt sizes
plete
Up to 5 batches can be registered
for a tool
AC adapter
port
Recommended range
Ex.1
RS232C
I/O
41mm
Multiple fastening works with
different target torques
Ex.3
Pairing
lamp
Pairing Power
button lamp
Ex.1
]
• Torque value
• Angle value
• Fastening curve
Input: AC100-240V 50-60Hz
Output: DC24V/1.0Ah
Communication method
WLAN (IEEE802.11a/b/g/n)
Frequency band
2.412-2.472GHz / 5.180-5.240GHz
Channel
2.4GHz band: 1ch − 13ch / 5GHz band: 36,40,44,48ch
Recommended range **
2.4GHz band: 16m / 5GHz band: 10m
No. of connectable devices
Maximum 8 tools
Input/output terminal (I/O)
Input: 8 / Output: 8
Power consumption **
30W
Dimensions (L x H x W) **
239mm × 150mm × 41mm
(Hight including antenna: 281mm)
Weight **
550g (Main body only)
Communication interface
• Ethernet × 2
Communication protocol
OpenProtocol
Data storage **
100,000 history data (Including fastening curve)
Optional accessory
• Controller stand
Compatible tools
EYFMH1WC / P, EYFMH2WC / P
• USB-A × 1
AC adapter
WEYFRW1K7751
UK: WEYFRW1K7851
EU:
• RS232C × 1
• AC adapter
* Communication range varies with operating environment. The presence of metal walls, people, or other objects may result in decreased range.
** Numbers are approx.
12
