EN katalógus általános Kolver 2022 - Flipbook - Page 48
PLUTO Screwdrivers / Accessories
Accessories for PLUTO Hand-held Screwdrivers
Code
Model
Description
010180
RIV HD1
8 mm hole. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N.
010182
RIV HD3
3 mm hole. Model for PLUTO3D, PLUTO6D, PLUTO10D/N, PLUTO15D/N.
010111/1
A2
For non-magnetic M2-M2.6 screws. It can be installed on any screwdriver.
010111/2
A3
For non-magnetic M3-M4 screws. It can be installed on any screwdriver.
Riveting heads
Vacuum attachments
010121
010121/UNI
ASP HD9
ASP HD9/UNI
Rubber pad output. Best suited for round-headed screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15.
Metal tube output. Best suited for grub, allen and long screws. Model specifically designed for PLUTO3, PLUTO6, PLUTO10 and PLUTO15.
Autocatchers
010113
AC 2.3
For M2-M3 screws. Easily picks up non-magnetic screws with a small plastic clamp.
010114
AC 3.5
For M3-M5 screws. Easily picks up non-magnetic screws with a small plastic clamp.
Tool holders and adaptors
234545
Diametre adaptor
010300
TECBA1
Reduction adaptor for PLUTO35 & 50CA drivers allowing interface with LINAR and CAR series arms
TECBA1 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 0.4-1 kg capacity.
010312
TECBA2
TECBA2 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 1-2 kg capacity.
010313
TECBA3
TECBA3 tool balancers allow screwdrivers to be positioned over the workstation for maximum operator comfort. 2-3 kg capacity.
010500
ARM PV1
ARM PV1 support arm consists of a vertical support on which a 180° pivoting arm is attached.
Cables (to connect screwdriver to controller)
200063
2.5 m
Standard 5 pin cable for PLUTO series − included with screwdriver
250063/N
2.5 m
Standard 8 pin cable for PLUTO /TA (Torque & Angle) series − included with screwdriver
200063/H
2.5 m
5 pin cable with strain relief for PLUTO series − heavy duty applications
250063/H
2.5 m
8 pin cable with strain relief for PLUTO /TA (Torque & Angle) series − heavy duty applications
200563
5m
5 pin cable, 5 m length for PLUTO series
250563
5m
8 pin cable, 5 m length for PLUTO /TA (Torque & Angle) series
200563/S
5m
5 pin spiral cable for PLUTO series
250563/S
5m
8 pin spiral cable for PLUTO /TA (Torque & Angle) series
PLUTO Series
48
