HMT 2025 Termékkatalógus - Flipbook - Page 115
ImpactaDie & ImpactaDie XL - Data Sheet
Thread
Repair / Cleaning
Impact Torque Ft Lb
70
120
175
220
300
400
520
695
Thread Cutting
Inch
1/4" UNC
5/16" UNC
3/8" UNC
1/2" UNC
5/8" UNC
3/4" UNC
7/8" UNC
1" UNC
Impact Torque Ft Lb
105
180
260
330
450
590
785
890
Metric
Die Nut Size
M6 x 1.0
M8 x 1.25
M10 x 1.5
M12 x 1.75
M16 x 2.0
M20 x 2.5
M24 x 3.0
95
180
270
295
455
605
880
65
115
180
195
300
400
585
Conduit Thread
Repair / Cleaning
Impact Torque Ft Lb
165
200
245
Conduit Thread Cutting
M16 x 1.5
M20 x 1.5
M25 x 1.5
Impact Torque Ft Lb
245
305
385
BEST PRACTICE ADVICE
Thread Cutting
Impact Torque Nm
140
245
355
450
605
810
1060
1205
130
240
360
400
610
820
1190
Conduit Thread Cutting
Impact Torque Nm
330
410
520
Thread
Repair / Cleaning
Impact Torque Nm
95
165
235
300
405
540
710
805
90
160
240
270
410
550
790
Conduit Thread
Repair / Cleaning
Impact Torque Nm
220
275
340
GUIDELINE PARAMETERS ONLY - Actual parameters may vary depending on operating conditions
1. Before cutting the thread, the ImpactaBurr chamfer tool must be used to ensure that the fastener/workpiece has a consistent
60 degree bevel/chamfer.
2. To ensure best results for the life of the Die and avoid the thread cutting unevenly on the fastener/workpiece, ensure the tool is held
squarely in alignment with the fastener/workpiece.
3. When cutting a new thread use the Guide collar and Guide to help keep the Die in alignment with the fastener/workpiece.
4. For cleaning/repairing or rethreading applications, the 昀氀ush collar is intended to allow the die to cut a full length thread.
5. Firm forward pressure is recommended both for starting/cutting the thread and when reversing the tool to remove the Die Threader
from the fastener.
6. Ensure regular application of SpeedLube cutting 昀氀uid prior to and during the cutting process to minimise heat build up.
7. Take care when handling ImpactaDie and workpiece as threaded components may get very hot.
8. Avoid lateral movement or tilting which can cause damage to the tool.
9. Periodically check Die and ImpactaDie Holder/Collar and remove Swarf as required.
10. When cutting a full thread with the ImpactaDie system it is recommended to use an Impact wrench rather than a rotary drill to avoid
potential hand/wrist injury from reaction torque.
11. Ensure the use of appropriate PPE at all times when using cutting tools (Safety Glasses, Gloves etc).
12. Impact wrenches of 3/8, 1/2 or 3/4"" square drive are recommended (rather than 1/4" impact drivers).
QUICK GUIDE
MORE INFO
- For fastest & safest performance use on Impact Wrenches
- For best results & to avoid kickback, use the ImpactaDie system with an
impact wrench rather than a rotary only drill.
- Hardened grades of material may require increased torque
- Use appropriate lubrication and correct torque to achieve long tool life.
115
