OHTAKE EN-e KOPEX DEALER HUNGARY - Flipbook - Page 12
BS Series
Supported
diameter
Pneumatic Screw Feeder
M2.0–M6.0
Capacity
Supported
under-head
length
Approx.
80–
1300 cc
Longest :
12/14/25mm
For iron
screws
Robotic Type
Manual Type
With a Counter
Non-ferrous
materials:
supported
*For details, please refer to each product’s speci昀椀cations.
Manual
Robotic
Fixed-quantity pick up
Pneumatically feeds screws to their
destination in an instant.
BS-D
BS(S) BS(L) BS-P BS-R
BS-C
BS-P
*BS-P irrespective of material / Other models only for iron screws
Uses air pressure to convey screws to
distant locations
Brings screws right to you using air pressure,
dramatically improving work e昀케ciency.
*The default hose is 2.5 meters long and requires air tubing to be installed.
BS(L)
BS-R
BS-D
BS-C
Compatibility Table
Main component type
Supported
screw
diameter
(mm)
Space-saving, high-capacity model
Separating the screw feed from pick-up points allows for
a space-saving design.
Four types based on different needs
BS (manual and robotic): Pneumatically feeds screws in
response to an external signal.
BS-R (robotic pick up): Sliding unit conveys screws to
screwdriver pneumatically, greatly cutting down on yield time.
BS-C (fixed-quantity bulk pick up) : Pick up the set quantity
with the counter and it allows for pick up by simply pulling
the lever.
BS-D (昀椀xed-quantity single pick up) : Pick up the set number of
screws and bolts one at a time next to your hand.
BS(S)
BS Series
BS-R Series
BS-D Series
BS-C Series
Scooping chamber
capacity: approx.
280cc
Scooping chamber
capacity: approx.
1300cc
-
2.0
BS-S20
BS-L20
BS-R20
-
BS-CS20
BS-CL20
2.3
BS-S23
BS-L23
BS-R23
-
BS-CS23
BS-CL23
Scooping chamber
capacity: approx.
280cc
-
Scooping chamber
capacity: approx.
1300cc
2.6
BS-S26
BS-L26
BS-R26
-
BS-CS26
BS-CL26
3.0
BS-S30
BS-L30
BS-R30
BS-D30
BS-CS30
BS-CL30
3.5
BS-S35
BS-L35
BS-R35
BS-D35
BS-CS35
BS-CL35
4.0
BS-S40
BS-L40
BS-R40
BS-D40
BS-CS40
BS-CL40
5.0
BS-S50
BS-L50
BS-R50
BS-D50
BS-CS50
BS-CL50
6.0
BS-S60
BS-L60
-
BS-D60
BS-CS60
BS-CL60
Full diagrams of each model can be
downloaded from our website.
Model Diagrams
BS(S)/BS-C(S)
Series
BS(L)/BS-C(L)
Series
Power switch
(for BSC, installed on the side of the shooter box)
Regulator
BS-C Series
Shooter box
Power switch
(for BSC, installed on the side of the shooter box)
Regulator
Power switch
Pneumatic feed tube
connection
I/F connector
Air connection
For BS-C (S) model diagrams,
refer to BS
External I/F
connector
Display panel
Air connection
[ BS-C ]
Screw feeder
BS-R Series
For BS-C (L) model diagrams,
refer to BS
External I/F
connector
Pneumatic feed tube
connection
Shooter
box
Screw feeder
Screwdriver
DC jack
[ BS ]
Pneumatic feed tube
connection
DC jack
Pick-up lever
BS-D Series
Regulator
Main
component
Mounting surface
Slide unit
Regulator
Main
component
Screw pick-up point
Receiver
Power switch
Display panel
Power switch
Air connection
Pneumatic feed tube connection
Pneumatic feed
tube connection
Stroke＝25
Receiver I / F
connector
Air connection
Bolt pick-up
point
Receiver I / F
connector
Sliding unit I/F connector
- Screws are pneumatically fed by request through an
external signal.
- Screws are fed to the screwdriver’s Y pipe with the screw
side at the front.
- It is compatible with the robotic and manual screwdrivers.
- Fixed quantities of screws are picked up in bulk.
- The screw feeder can be placed outside the workspace,
saving more space for work.
- Fixed quantity pick up can prevent screw-tightening being
forgotten.
Model name
Exterior dimensions
BS-L
BS-CS
BS-CL
BS-D
BS-P
BS-R
169(W)×436(D)×
270(H)
118(W)×310(D)×
237(H)
169(W)×436(D)×
270(H)
169(W)×436(D)×
270(H)
175(W)×304(D)×
186(H)
118(W)×310(D)×
237(H)
Approx. 4kgf
Approx. 10kgf
Approx. 5kgf
Approx. 12kgf
Approx. 12kgf
Approx. 4kgf
Approx. 4.6kgf
AC100V － 240V DC15V 1A AC adapter
0.5MPa MAX 400L /min
Screw feeder
Drive motor
Screw feeder
Screwdriver
BS-S
Air
Receiver
- Screws are pneumatically fed by request through an
external signal.
- Placing the screw-feeding part of the slide unit near the
screwdriver can shorten the time it takes to feed screws to
the screwdriver.
- Screws are fed with the head at the front.
- It is compatible with screw-tightening robots.
DC brushless motor
Pneumatic screw-feeding direction
Overload protection/recovery circuit
External interface
○
○
○
○
○
○
○
○（D-SUB 9pin)
○（D-SUB 9pin)
-
-
-
○（D-SUB 9pin)
○（D-SUB 9pin)
Approx. 1.2sec
Approx. 1.5sec
Yield time
M6X25/3M Approx. 2 seconds by tube
Supported screw diameter
Slide unit
Supported screw under-head length
- Fixed quantities of screws are picked up one at a time.
- The screw feeder can be placed outside the workspace,
saving space for work.
- It feeds the screw next to the hand doing the screwtightening work.
- Fixed quantity pick up can prevent screw-tightening being
forgotten.
Pneumatic feed tube
connection
118(W)×310(D)×
237(H)
Power
[ BS-D ]
Pneumatic
feed switch
Speci昀椀cations
Volume (including the rail)
[ BS-R ]
DC jack
Pneumatic feed tube
connection
ROBOT I/F connector
DC jack
M2.0 － M6.0
M3.0 － M6.0
M1.0 － M3.0
M2.0 － M5.0
Up to 25 mm in length
UpP to
10 － 25mm
T～QT«
«
in length
Up to 12 mm
in length
Up to 14 mm
in length
Approx. 80cc
Approx. 280cc
Supported total length of screw
Screw capacity
Length/head diameter = 1.3 or more
Approx. 280cc
Accessories and bundled items
Accompanying unit
Approx. 1300cc
Approx. 280cc
Approx. 1300cc
Approx. 1300cc
Instruction manual, AC adapter, hex wrench, adjusting screwdriver, earth wire, pneumatic feed tube（2.5 meters)
-
-
Shooter box
Form：113(W)×82(D)×140(H)
Capacity: Approx. 20 for M6X25
Receiver
Form：30(W)×52(D)
×120(H)
-
Slide unit
Form：116(W)×
144(D)×(120H)
*Please inquire prior to placing an order.
21
22
