OHTAKE EN-e KOPEX DEALER HUNGARY - Flipbook - Page 2
Features of
Automatic Screw / Bolt Presenters
Compatible with line changes for adjustments
to screw diameter and shape, significantly
improving QC and productivity
’s automatic screw presenters
make use of a horizontal rail system, which
supports a wide range of screw materials and
shapes, diverse workstyles, and workpiece
dimensions. This unique mechanism and
advanced technology can hugely contribute
to the e昀케ciency of your production line.
Automatic screw presenters dramatically increase the speed of tightening
screws. Through ease of use and employing the world’s first swappable
rail mechanism, these devices allow you to work with screws of varying
diameters and formats. Even if changing a workpiece entails different
screw diameters, all you need to do is swap in a new rail. There is no
need to replace the present mechanism itself, reducing equipment costs.
The horizontal rail mechanism offers speedy and stable screw feeding,
highly versatile design, and ease of use in our OHTAKE automatic screw
presenters, driving highly ef昀椀cient screw-tightening work.
Speedy and Smooth
Fixed-Point Pick Up
Fixed-Quantity Pick Up
The horizontal rail provides a stable,
orderly array of screws
Unlike gravity-based present mechanisms, this one uses vibration
to convey screws in a horizontal rail, doing away with problems like
screw-clogging and allowing stable presenting, even for screws with
attached washers.
The average screw present
time is 2 per second
Makes work easier
Supports screws with washers and special formats
The horizontal rail enables the smooth presenting of numerous types of special screws,
including those with washers and with short under-head lengths.
Normal screw
With washer
Nut
Special parts
Other key features
・Easy to handle and operate: Simply install to get up and running. All you have to do is push the
power switch.
・Adding screws is a snap. Simply insert in bulk in the scooping chamber.
・It takes only 5 seconds with a single hex wrench to swap the rail and accommodate the screw
diameter changes (NJ/NSB type). Simply loosen the rail-tightening screws, swap in a new rail,
and adjust the position while tightening the screws back into place.
・In the event that too many screws are inserted or have become clogged, the unit automatically cuts
the power to the drive motor and shuts off.
1
Achieve a three- to 昀椀vefold increase in working speed
based on traditional manual work. Average screw
pick up of 2 per second greatly improves working
ef昀椀ciency.
Supports standard bits
from various screwdriver
manufacturers
No need to attach a specialized bit to electric
screwdrivers. Simply use the standard bits you
are accustomed to using. Bring magnetized bits
perpendicular with the V-shaped groove of the bit
guide, engaging the screw head and allowing it to be
caught by simply pulling it close. Supports suctionstyle screwdrivers.
Now you can tighten screws with one hand, improving
the stability and ef昀椀ciency of assembly work.
Accommodate di昀昀erent screw
diameters by simply swapping
rails
It supports numerous screw types with ease—all you
need to do is to swap in the rail for a given screw
diameter. For example, NSB models support up to 8
screw diameters in a single device.
Some models require
exchanging parts in
addition to swapping
the rail.
2
